20t/h Gypsum Powder Board Chain Elevator

 

NE type plate chain bucket elevator is a plate chain type, gravity-induced discharge lifting equipment. It is suitable for vertical conveying of powdery, granular and small abrasive or non-abrasive materials, such as raw meal, cement, coal, limestone, dry clay, clinker, etc.

NE type plate chain bucket elevator is a new type of lifting product developed by introducing foreign advanced technology; NE series plate chain bucket elevator is used in various industrial countries. Due to energy saving and high efficiency, NE type plate chain bucket elevator is gradually replacing HL type isocyclic chain hoist. NE type plate chain bucket elevator is inflow feeding, the material flows into the hopper and is lifted to the top by the plate chain, and unloads by itself under the action of material gravity. The main technical parameters conform to the Ministry of Machinery standard (JB3926-85). NE type plate chain bucket elevator adopts self-flow charging and gravity discharging. The chain is a high-quality alloy steel high-strength plate chain, which is wear-resistant and reliable. The drive part adopts a hard tooth surface reducer. The elevator is suitable for vertical conveying of medium, large and abrasive materials (such as limestone, cement clinker, gypsum, lump coal), and the material temperature is controlled below 250℃.

 

 

 

1. Good sealing and less environmental pollution.

2. The operation and maintenance are convenient and the wearing parts are few.

3. Low cost of use, extremely low cost due to energy saving and less maintenance.

4. Induced gravity discharge

 

 

		10	25	50	75	100
NE15	16	65	50	40	30	25
NE30	31	90	75	58	47	40
NE50	60	90	75	58	47	40
NE100	110	130	105	80	65	55
NE150	165	130	105	80	65	70
NE200	220	170	135	100	85	70
NE300	320	170	135	100	85	70
NE400	441	205	165	125	105	90
NE500	470	240	190	145	120	100
NE600	600	240	190	145	120	100
NE800	800	275	220	165	135	110

 

 

NE type plate chain bucket elevator is composed of running parts, driving device, upper device, middle casing and lower device.

Running parts---consists of hopper and special plate chain, NE30 and lower use single-row chain, NE50--NE800 use double-row chain.

Driving device---using a variety of driving combinations to drive, (according to the actual needs of the user). The driving platform is equipped with a maintenance frame and a railing. The drive system is divided into two types: left and right.

The upper device---is installed with track (double-row chain), backstop, and the discharge port is equipped with an anti-return rubber plate.

Middle section---Part of the middle section is equipped with track (double chain) to prevent the chain from swinging during operation.

Lower device---installed with automatic tensioning device.

1.Driving device 2.Discharge port 3.Upper section 4.Traction member 5.Hoppers6.Center casing 7.Lower section8.Tensioning device 9.Feed port 10.Inspection Gate

 

 

resin, paint, medicine, medicine, cosmetics, fire extinguishing agent, plastic powder, abrasive glass, etc.

abrasives, alumina, porcelain mud, clay mud, glass powder, refractory materials, quartz sand, PVC resin Powder, citric acid, polyethylene powder, washing powder, etc.

sugar, monosodium glutamate powder, salt, fruit juice, starch, milk powder, food, soy milk, egg powder, rice noodles, soy sauce, fish Powder, pineapple juice, etc.

carbon black, cosolvents, activated carbon, pearls, etc.

 

 

 

1. Pay attention to the operation of the hopper, traction chain and sprocket. The running part must not collide with other fixed parts or get stuck. The two chains should run in the same way, and the hopper is not allowed to be skewed.

2. Whether the oil temperature of each bearing is normal, (after 2 hours of operation, the temperature should not be greater than 60℃) whether the lubrication and sealing are good.

3. Whether the accelerator has excessive noise, whether there is oil leakage, whether the coupling is reliable, and whether the electrical control is normal. No-load power should not exceed 35% of rated power.

4. Carefully observe the backstop device to see if it is reliably disengaged and engaged during operation.

5. Whether all the fasteners are loose, pay special attention to the tightening of the fixing bolts between the hopper and the chain after parking.

After the no-load test machine is completed and deemed satisfactory, a 16-hour load test machine should be carried out, that is, the operation should be carried out under the conditions of the original designed lifting amount and lifting materials.

 

 

Pre-Sale Service:

• Guide customers to choose the appropriate equipment model.
• Send engineering and technical personnel to the production site in time to plan the site for customers, design reasonable processes and solutions.

 

 

After-sale Service:

• The main warranty period of the equipment sold by our company is one year (except for the failure or damage caused by human factors, fuel factors or irresistible natural phenomena, and vulnerable parts are not covered by the warranty: fuel injectors, pump heads, photosensitive eyes, etc.).
• If the equipment failure is caused by human factors, the cost will be charged according to the factory price.
• After receiving the warranty notice, reply within 2 hours. 24 hours technical guidance to solve problems.

 

 

 

Zhengzhou Odifei Machinery Equipment Co., Ltd. has been focusing on conveying equipment for 17 years. Its main business is: spiral vibration vertical elevator, slat feeder, chain plate conveyor, slat conveyor, scraper conveyor, large angle belt conveyor, screw conveyor Conveyor, chain bucket conveyor, TD belt bucket elevator, TH ring chain bucket elevator, NE bucket elevator, NSE bucket elevator and other full range of bucket elevators. TD75 belt conveyor (or belt conveyor), mobile conveyor, belt conveyor with large inclination angle ribs; screw conveyor, shaftless screw conveyor; light, medium and heavy chain plate conveyor; chain bucket conveyor machine, SCD trough clinker conveyor; horizontal double shaft mixer; light, medium and heavy plate feeder; GZG motor vibration feeder; trommel screen, shaftless trommel screen;

In 2010, our company's R&D team entered the resource recycling industry, and successively developed domestic waste treatment scaly conveyors, domestic waste screening and sorting shaftless trommel screens, construction waste slat feeders, and electric arc furnace scaly scrap conveyors, which not only create It also creates objective social and environmental benefits, and is an indispensable part of the resource recycling industry chain.

Zhengzhou Odifei Machinery Equipment Co., Ltd. has continuously carried out technological innovation in the spirit of excellence, and has developed several practical new products. The product is advanced in design, fine in production, reliable in performance, has international advanced level, sells well at home and abroad, and aims to be the industry leader!

 

 

20t/h gypsum powder board chain elevator

A: We are a factory, established in 2007, specializing in the manufacture of vertical vibration hoists, vertical vibration elevator, bucket elevators, belt conveyors, scale conveyors, screw conveyors, etc. Bucket elevator can be used in chemical industry, ceramic industry, food industry, metallurgical industry, etc..

 

A: We always provide spare parts at cost price and give you a list of spare parts when you buy the machine.

 

A: Yes, we will test each machine and production line before delivery, and send the working video to you. You can also check with us before delivery.

 

A: If the feeding is excessive or uneven, control the feeding.

 

A: Generally, the three can be used in general. The material lifted by the belt elevator cannot be too high. NE elevator has large lifting capacity.

 

A: Checking the bolts and tightening the chain will help solve this problem.

 

A: The installation of conventional equipment can be guided remotely, and the production line or customized equipment can be arranged with technicians to guide the installation and debugging on site.

 

 

 

1. Pay attention to the operation of the hopper, traction chain and sprocket. The running part must not collide with other fixed parts or get stuck. The two chains should run in the same way, and the hopper is not allowed to be skewed.

2. Whether the oil temperature of each bearing is normal, (after 2 hours of operation, the temperature should not be greater than 60℃) whether the lubrication and sealing are good.

3. Whether the accelerator has excessive noise, whether there is oil leakage, whether the coupling is reliable, and whether the electrical control is normal. No-load power should not exceed 35% of rated power.

4. Carefully observe the backstop device to see if it is reliably disengaged and engaged during operation.

5. Whether all the fasteners are loose, pay special attention to the tightening of the fixing bolts between the hopper and the chain after parking.

After the no-load test machine is completed and deemed satisfactory, a 16-hour load test machine should be carried out, that is, the operation should be carried out under the conditions of the original designed lifting amount and lifting materials.

 

 

 

 

If you are interesting in 20t/h gypsum powder board chain elevator, please feel free contact us in 24 hours!

 

Populární Tagy: 20t/h gypsum powder board chain elevator, China 20t/h gypsum powder board chain elevator manufacturers, suppliers, factory